Brother 681B-UG - Manual (Page 14)

STITCH LENGTH
The stitch length is regulated by turning the
stitch length dial.
Numerals on the dial represent the stitch
length.
THE HIGHER THE NUMBER, THE
LONGER THE STITCH.
To increase the stitch length, turn stitch
length dial counter-clockwise to larger
number on the dial.
To decrease the stitch length, turn dial
clockwise to smaller on the dial.
NOTE:
1. The “0” on the dial means that the
material is not being fed.
2. Always set at 4 when you sew triple
stretch stitch (See page21).
ZIGZAG WIDTH
The zigzag width is regulated by operating
the zigzag width lever.
Numerals above the lever represent the
width of stitch.
THE HIGHER THE NUMBER, THE
WIDER THE STITCH.
The “0” means straight stitch only.
NOTE:
Do not move the lever while
the needle is in the material.
-12-