Brother 681B-UG - Manual (Page 21)

3. Zigzag Stitching
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
SIMPLE ZIGZAG STITCH
Set the Stitch zigzag, sew about 1-4 to
obtain simple zigzag stitch.
1. Before stitching zigzag, sew about 5-6
Straight stitches with stitch length
between for reinforcement.
2. Set zigzag width lever to your desired
width and commence to sew.
3. Before removing work from machine,
reset the zigzag lever to “O” and sew 5-6
stitches for reinforcement.
NOTE: Generally, zigzag stitch requires less
upper thread tension than the straight
stitches.
SATIN STITCH
When the Stitch Length Dial is set to
between the “SATIN STITCH” is produced.
This is used to make buttonholes and
various decorative stitches.
NOTE: It is recommend that a test sample
is made before starting to sew.
-19-