Metrohm 814 USB Sample Processor - Manual (Page 20)

2.2 Rear panel ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭ 814 USB Sample Processor
2.2 Rear panel
USB 2
USB 1 Contr.
MSB 1
MSB 2 MSB 3
Made by Metrohm
Herisau Switzerland
P: 115W U: 100 - 240 V f: 50 - 60 Hz WARNING - Fire Hazard -
For continued protection replace only
with the same type and rating of fuse
Nr
.
1 2 3 4 5
Figure 4 Connector strip
1 USB connectors 2 Controller connector
For the connection to the PC or Touch Con-
trol.
3 MSB connector
For stirrers, dosing devices, Remote Box. 4 Mains connection
5 Type plate
Contains specifications concerning mains
voltage and serial number.
2.3 Sample racks
A sample rack is a turntable that acts as a receptacle for sample vessels.
Various types of sample racks are available for different numbers and
types of sample vessels.
The 814 USB Sample Processor requires sample racks with up to a maxi-
mum of 42 cm diameter.
Figure 5 6.2041.470 Sample rack
Other user-defined racks can be supplied upon request and the required
rack data can be loaded and configured in the control software. Any
arrangement of rack positions is possible.