Metrohm 814 USB Sample Processor - Manual (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
814 USB Sample Processor ￭￭￭￭￭￭￭￭ 19
3 Fix the rinsing tubings
￭ Place the rinsing tubings into the guide chain.
3.5 Guide chain for cables and tubing
Tubings and cables can be placed into the guide chain.
You can open the individual chain links with a screwdriver as follows.
1 Open the guide chain
￭ Insert a screwdriver into the groove located on the side of a chain
link.
￭ Loosen the clip with a forceful leverage movement.
￭ Pull the clip out of the chain by hand.
￭ Repeat the above actions for each chain link.
Figure 10 Guide chain - Opening chain links
2 Insert into the guide chain
￭ Place the required tubings or cables into the guide chain.
3 Close the guide chain
￭ Close the clip for each chain link again by hand and apply forceful
pressure to snap them into place.