Metrohm 814 USB Sample Processor - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
814 USB Sample Processor ￭￭￭￭￭￭￭￭ 21
6.0xxx.xxx
6.1236.020
6.2740.020
6.2709.070
6.1543.200
6.1543.170
1
1
1
2
2
4
3
5
6
Figure 12 Installing accessories for the titration
1 Insert three spray nozzles (6.2740.020) or rinsing nozzles
(6.2740.030) into the oblique bore holes, see figure.
2 Insert two 6.2709.070 guide sleeves into the titration head, see
figure.
3 Insert a 6.1543.200 titration tip (with antidiffusion valve) into a
guide sleeve.
4 Insert a 6.1543.170 aspiration tip into a guide sleeve.
5 Slide a 6.1236.020 SGJ sleeve with standard ground joint onto the
electrode to be used. Insert the electrode into the titration head, see
figure.