Metrohm 877 Titrino plus - Manual (Page 56)

5.13 Manual Control
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46 ￭￭￭￭￭￭￭￭
877 Titrino plus
3 Configure the dosing function
NOTE
￭ The dosing and filling rate should be decreased for viscous liq-
uids.
￭ The maximum dosing and filling rate depends on the cylinder
volume (see Chapter 10.1.1, page 101) .
￭ Enter the dosing rate.
￭ Enter the filling rate.
4 Start dosing
￭ Press [START].
The status changes to busy, the dosed volume is displayed. When a
cylinder volume has been added, the dosing cylinder will be refilled
automatically.
5 Fill the cylinder
￭ Press [STOP] or [BACK].
The dosing cylinder is filled. If you start the filling with [BACK], then
the dialog will also be exited.
Dosing a particular volume (ADD)
You can dose a particular volume with the ADD function.
Proceed as follows:
1 Open the manual control
￭ In the main dialog, select Menu and press [OK].
The main menu opens.
￭ Select the menu item Manual control and press [OK].
Manual control opens.