Metrohm 845 Eluent Synthesizer - Manual (Page 40)

3 «Mix Control» software
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
34
Mode
Prepare components
The mode " Prepare components " is used in the rinsing
process.
Empty components
The mode " Empty components " is used in the rinsing
process.
Economy
If Economy has been activated then the Dosino contents
(is always the Main Component, after an action has
been completed) will be ejected into the component
container at the start of the rinsing process. If
Econo-
my has not been activated then the Dosino contents will
be ejected in the usual way and can be collected in a
waste container.
Economy is intended for circumstances in which the
Main Component has to be used very sparingly.
Component X
The Components (see section 3.4.2) configured in the
Depot (see section 3.4.1) are listed. The rinsing process
is always carried out for those Component(s) that have
been set as
active .
Rinsing Mode "Empty components""
The rinsing mode " Empty components " can be selected in the RINSE
window under the parameter Mode .
What effect has a rinsing process with Mode " Empty components "?