Metrohm 845 Eluent Synthesizer - Manual (Page 59)

5.2 Standard equipment
845 Eluent Synthesizer / Instructions for Use 8.845. 8001EN
53
Quantity Order no. Description
1 6.1808.200 Connectors to MPak, set of 3
1 6.1816.020 Silicone tubing 6 mm i.d., 1 m
Drainage tube
Material Silicone rubber
Outer diameter in mm 9
Inner diameter in mm 6
1 6.1838.000 FEP Tubing Connection to 845, 1 x
M6 / 45 cm
Tubing connection from Eluent Synthe-
sizer to eluent bottle adaptor
1 6.1903.060 Teflon Stirring bar 30 mm
Stirring Bar with magnetic core, PTFE
coated, length 30 mm. For Eluent Syn-
thesizer.
1 6.2122.0X0 Mains cable
to customer's specifications:
Cable socket Cable
connector
Type IEC 320/C 13 Type SEV 12 (CH…) 6.2122.020
Type IEC 320/C 13 Type CEE (7), VII (D…) 6.2122.040
Type CEE (22), V
Type NEMA 5-15 (USA…) 6.2122.070
1 6.2151.000 Cable USB A - mini-DIN 8P
Cable for connecting the Eluent Syn-
thesizer to the PC (USB connection,
type A)
1 6.2248.010 Magnetic shield , 15 x 68 mm, 3
pieces
1 6.2739.000 Wrench
For tightening nipples.
1 6.2744.170 Pressure screw PEEK UNF 1/4-28, 3
pieces
Fixing connecting capillaries from the
component containers to the Eluent
Synthesizer.
Material PEEK