Metrohm IC Net 2.3 - Manual (Page 116)

6 Devices
IC Net 2.3 106
Actual Display of actual values.
Mode Display of current detector mode.
Oven Display of current ovent state.
Control Display of current control line settings.
<Set> Send current parameters immediately to the
871 Advanced Bioscan. Parameters are not
stored in the system file (
*.smt
) as long as
the file is not saved.
DC mode
This subtab of the Method parameters tab in the 871 Advanced Bio-
scan window contains the method parameters for the DC mode.
These values are sent and applied to the 871 Advanced Bioscan
by
Start determination and Startup hardware , or if the values are
sent manually with <Set> .