Metrohm 850 Professional IC Cation - LP-Gradient - Manual (Page 46)

3.10 Low pressure gradient
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36 ￭￭￭￭￭￭￭￭
850 Professional IC Cation – LP Gradient
Connecting mixing coil for low pressure gradients
2
3
4
1
Figure 18 Connecting mixing coil for low pressure gradients
1 Eluent outlet 2 Pressure screw long
for the connector on the mixing valve.
3 Mixing coil for low pressure gradients
6.2758.020 4 Pressure screw short
for the connection on the high pressure
pump.
1 Screw on the 6.2758.020 mixing coil for low pressure gradients
(18-3) with the 6.2744.090 long PEEK pressure screw (18-2) to the
eluent outlet (18-1).
2 Fasten the other end of the mixing coil for low pressure gradients
(18-3) with the 6.2744.070 short PEEK pressure screw (18-4) directly
to the inlet valve holder of the high pressure pump (see Chapter
3.11.2, page 39).