Metrohm IC Net 2.0 - Manual (Page 133)

7.5 Calibration and quantification
IC Net 2.0 125
Worst case...
Information on the component with the
worst (largest) deviation of actual and ex-
pected retention time. Deviation is given as
a part of component’s identification win-
dow.
Average relative deviation
Relative deviation averaged for all compo-
nents.
7.5.6 Concentration table
IC NET / Method / Calibration / Concentrations
Selecting this menu item or clicking on
<Concentrations>
in the
component table opens the
Concentrations
window with the con-
centration table containing concentrations of all components for
all Calibration levels . Each calibration level corresponds to a sam-
ple used for calibration and to a point on the calibration curve.
Concentration units User defined units of concentration which
will appear in the report. Nevertheless, en-
try of new concentration units does not
cause recalculation of concentrations.
Data type Choice of the data type that will be shown
in the concentration table: concentrations
(default setting), peak heights , peak areas ,
volumes .
Number Number of the component (read-only).
Name
Name of the component taken from the
component table (read-only).
This run Contains concentrations (or other chosen
values) obtained in the current run (read-
only, except for universal component).