Metrohm 870 KF Titrino plus Installation - Manual (Page 26)

3.1 Configuration ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
20 ￭￭￭￭￭￭￭￭ 870 KF Titrino plus
￭ Select the menu item System and open the system dialog with
[OK].
￭ Select the menu item External devices and confirm with [OK].
The list of configurable external devices is displayed:
Saving PC/LIMS reports on a USB stick
1
￭ With the arrow key [ ⇩], select the menu item PC/LIMS report
and confirm with [OK].
The properties dialog PC/LIMS report opens:
￭ Select USB Stick and apply with [BACK].
Sending PC/LIMS reports directly to a PC
If you directly send the PC/LIMS reports to a PC and import them into
tiBase, you have to configure the COM2 port.
Proceed as follows:
1 Define the PC/LIMS report
￭ With the arrow key [ ⇩], select the menu item PC/LIMS report
and confirm with [OK].
The properties dialog PC/LIMS report opens:
￭ Select COM2 and apply with [BACK].
2 Configure the interface
￭ Select COM2 settings and confirm with [OK].
￭ Select Handshake and confirm with [OK].
￭ Select software and apply with [Back].