9 mounting the safety shield, Mounting the safety shield, Figure 13 – Metrohm 874 USB Oven Sample Processor User Manual
Page 30
Advertising
3.9 Mounting the safety shield
■■■■■■■■■■■■■■■■■■■■■■
22
■■■■■■■■
874 Oven Sample Processor
3.9
Mounting the safety shield
6.2751.140
1
1
2
2
3
3
Figure 13
Mounting the safety shield
Warning
It is imperative that the safety shield be installed before the first time
the 874 Oven Sample Processor is used. The device is not permitted to
be operated without a safety shield.
Proceed as follows:
1 Undo the hexagon screws on both sides of the tower with the
enclosed hexagon key.
2 Move the 6.2751.400 safety shield into position, starting from the
top. Observe the corresponding illustration.
3 Fix the safety shield in place with the hexagon screws.
Advertising