Metrohm 850 Professional IC Anion MSM-HC MCS Prep 2 - Manual (Page 32)

3.4 Setting up the instrument
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭
850 Professional IC –Anion – MSM-HC – MCS – Prep 2
3 Tubing olive 6.2744.034
For connecting capillaries to the aspiration
side of the peristaltic pump. 4 Pump tubing 6.1826.340
With black/black stoppers. For standard.
5 Pump tubing connection 6.2744.180
With safety device and filter. For connecting
capillaries to the outlet side of the peristaltic
pump. 6 PTFE capillary 6.1803.040
For the transport of the standard to the
lower injection valve.
7 Pressure screw 6.2744.014 8 PTFE capillary 6.1803.040
For the transport of the standard to the
waste container.
9 PTFE capillary 6.1803.040
Sample aspirating capillary. Connect it to the
lower injection valve. 10 PTFE capillary 6.1803.040
For the transport of the sample to the upper
injection valve.
11 PTFE capillary 6.1803.040
Sample outlet capillary. Connect it to the
upper injection valve.
3.4 Setting up the instrument
3.4.1 Packaging
The instrument is supplied in highly protective special packaging together
with the separately packed accessories. Keep this packaging, as only this
ensures safe transportation of the instrument.
3.4.2 Checks
Immediately after receipt, check whether the shipment has arrived com-
plete and without damage by comparing it with the delivery note.
3.4.3 Location
The instrument has been developed for operation indoors and may not be
used in explosive environments.
Place the instrument in a location of the laboratory which is suitable for
operation, free of vibrations, protected from corrosive atmosphere, and
contamination by chemicals.
The instrument should be protected against excessive temperature fluctu-
ations and direct sunlight.