Metrohm 850 Professional IC Detector - iDetector - Manual (Page 20)

2.4 Connecting the detector inlet capillary
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
2.850.9010 IC Conductivity Detector
Connecting detector inlet capillary to MSM / MSM-HC
1 Connecting detector input
￭ Connect the detector inlet capillary (5-1) and the capillary of the
MSM / MSM-HC (5-2) labeled with out to one another using a
6.2744.040 coupling (5-3) and two 6.2744.070 short pressure
screws (5-4).
1 2 3
4
Figure 5 Connector detector – MSM
1 Detector inlet capillary 2 MSM / MSM-HC outlet capillary
labeled with out.
3 Coupling 6.2744.040 4 Pressure screws, short 6.2744.070
Connecting the detector inlet capillary to the MCS
1 Connecting detector input
￭ Fasten the detector inlet capillary (6-1) using a 6.2744.090 long
PEEK pressure screw (6-2) on the output of the MCS (6-3).
3 2 1
Figure 6 Connection detector – MCS
1 Detector inlet capillary 2 Pressure screw, long 6.2744.090
3 MCS output