Metrohm NIRS XDS MasterLab Analyzer - Manual (Page 64)

62 ▪▪▪▪▪▪▪
To delete multiple Sample ID names, highlight
those fields, and use the “Delete” key on the PC
keyboard. Vision will ask for confirmation, as
shown.
If the fields are to be cleared, click “Yes”.
Otherwise click “No”.
At the beginning of this section it was explained that a DCM for tablet transmission comes up with a
slightly different layout for the Vial Dialog box. It is shown below:
Please note the “grayed out” positions at the upper left corner. This space is reserved for the Tablet
Transmission Reference, and cannot be used for sample tablets. Therefore the numbering is adjusted
for this spacing. The numbers on the diagram are consistent with the numbers on the tablet tray.
All other commands are as described previously for vials. In this case, 17 tablets are selected for
analysis, in the order shown.
6.2.2 Order of Sampling
There are multiple ways to set the order of vial sampling. As a rule, it is faster to sample in the
sequence of the “Order” column, since this involves less movement of the Tablet sampling
mechanism. This saves positioning time. If the Sample ID for each sample is entered in order, as