Standards and regulations, Blank hinge, Replacement accessory kit – Banner SI-HG63 Hinge Style Switches User Manual
Page 13: U.s. application standards, International/european standards, Si-hgz63a zinc die-cast
Blank Hinge
Model
Construction
Description
Dimensions
SI-HG63A
Stainless Steel
Blank hinge; same mechanical specifications
as SI-HG(Z)63 Series hinge switches, but
without the safety switch component
4.0 mm
(0.16")
19.5 mm
(0.77")
82.9 mm
(3.26")
45.0 mm
(1.77")
63.0 mm
(2.48")
6.3 mm
(0.25")
18 mm
(0.71")
33.0 mm
(1.30)"
82.0 mm
(3.23")
33.0 mm
(1.30")
18 mm
(0.71")
SI-HGZ63A Zinc Die-cast
Replacement Accessory Kit
Model
Kit Includes
SI-HG63-TK1
2 plugs
1 plastic washer
1 bit
1 screwdriver
1 installation instructions
SI-HG63-setscrew-5
5 replacement setscrews
Standards and Regulations
The list of standards below is included as a convenience for users of this Banner device. Inclusion of the standards below does not imply
that the device complies specifically with any standard, other than those specified in the Specifications section of this manual.
U.S. Application Standards
ANSI B11.0 Safety of Machinery; General Requirements and Risk Assessment
ANSI B11.19 Performance Criteria for Safeguarding
ANSI NFPA 79 Electrical Standard for Industrial Machinery
International/European Standards
ISO 12100 Safety of Machinery – General Principles for Design — Risk Assessment and Risk Reduction
ISO 14119 (EN 1088) Interlocking Devices Associated with Guards – Principles for Design and Selection
ISO 14120 Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards
ISO 13857 Safety Distances . . . Upper and Lower Limbs
IEC 62061 Functional Safety of Safety-Related Electrical, Electronic and Programmable Control Systems
ISO 13849-1 (EN 954-1) Safety-Related Parts of Control Systems
IEC 60204-1 Electrical Equipment of Machines Part 1: General Requirements
IEC 60947-1 Low Voltage Switchgear – General Rules
IEC 60947-5-1 Low Voltage Switchgear – Electromechanical Control Circuit Devices
IEC 60529 Degrees of Protection Provided by Enclosures
Hinge Wing Safety Interlock Switches
Datasheet
129465_web Rev.
D
www.bannerengineering.com - tel: 763-544-3164
13