Banner PresencePLUS BCR 1.3 Series - Manual (Page 12)

1
P/N 118000 rev. D
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Maintenance
Maintenance tasks include keeping the hardware free of dust and
dirt and updating the PresencePLUS software as new versions
become available.
Cleaning the Sensor
Regularly remove any accumulated dust or dirt from the Sensor
using a soft cloth. If needed, slightly dampen the cloth with a
weak solution of neutral detergent. Avoid getting dirt on the
Sensor’s imager (the area behind the lens). If the imager is dirty,
use anti-static compressed air to blow off the dust.
Cleaning the Sensor Lens
Regularly remove dust, dirt, or fingerprints from the lens. Use
anti-static compressed air to blow off dust. If necessary, use
a lens cloth and lens cleaner or window cleaner to wipe off
remaining debris. Do not use any other chemicals for cleaning.
Updating PresencePLUS Software
The current version of PresencePLUS software is available for
download from the Banner website:
www.bannerengineering.com
Click on Literature/Resources.
Click on Software and Electronic Data Sheets.
Select PRESENCEPLUSP from the Vision Product Line pull-
down menu, and click on Go!
Download the latest Firmware, PC software, or both.
NOTE: If you upgrade the PC software only, new features may
not be available until you load the latest firmware to the
Sensor.
sensor
maintenance
sensor
maintenance