Britax Boulevard - Manual (Page 21)

19
Rotate seat into forward-facing position.
Verify LATCH strap is not twisted, then attach
remaining LATCH connector to adjacent LATCH
anchor (fig. D).
A positive click confirms attachment.
Kneel on child restraint to push it into vehicle seat
while pulling each LATCH strap tight (fig. E).
Verify all connections and restraint are secure. The
restraint is secure when it cannot be moved front-
to-back or side-to-side more than 1” (2.5 cm.) at
belt path. If restraint is not secure, repeat procedure
or use an alternate seating location.
Remove slack from Versa-Tether and store excess
webbing in tether pouch.
Removal
Disconnect Versa-Tether from tether anchor. While
pushing restraint firmly into vehicle seat, press red
release buttons on LATCH connectors to release.
When not in use, always store LATCH connectors
and Versa-Tether.
5�
6�
•
7�
8�
9�
Installation: Forward Facing
D
WARNING!
Use vehicle belt (not LATCH connectors) for
installations with children weighing more than 48 pounds (21
kg.). Refer to your vehicle’s owner’s manual or contact vehicle
manufacturer for maximum weight rating for their LATCH anchors.
Unless specified otherwise by vehicle manufacturer, assume a 48-pound
child is vehicle LATCH anchor limit.
E