De f – Britax Boulevard User Manual
Page 34
32
Securing Your Child
IMPORTANT:
Always pull on harness after securing child
to make sure harness buckle and harness
adjuster are secure. If not, harness buckle
or adjuster area may be clogged with food,
drink or other objects that need to be
removed. See pages 34 and 36 for cleaning
instructions.
Adjust the belts provided with this child
restraint so they fit snugly around your child.
A snug strap should not allow any slack.
It lies in a relatively straight line without
sagging. It does not press on the child’s flesh
or push the child’s body into an unnatural
position.
Harness Height Adjustment
Loosen harness by lifting harness
adjuster lever while pulling harness
straps forward as far as possible.
Rotate head pad adjustment knob on
either side of restraint to raise or lower
headrest and harness (fig. F).
NOTE:
DO NOT force head pad adjustment
knob in either direction. If the knob is difficult
to turn, head pad may be at maximum or
minimum height.
Before each use, make sure harness is
tight.
See “Harness Height” (pg. 30) to determine
correct harness height for your child.
•
•
1�
2�
•
•
D
E
F