Britax Boulevard User Manual
Page 23
21
Hold shoulder belt tight, then rotate
lock-off upward until secured (fig. E).
If your vehicle is equipped with an automatic
locking retractor (ALR), use of lock-offs is not
required as long as ALR is activated. Check your
vehicle’s owner’s manual to determine type of
retractor your vehicle has, and for proper use
of retractor.
Verify all connections are secure and
restraint is stable. The restraint is
secure when it cannot be moved front-
to-back or side-to-side more than 1”
(2.5 cm.) at belt path. If restraint is
not secure, repeat procedure or use an
alternate seating location.
Remove slack from Versa-Tether®
and
store excess webbing in tether pouch.
Removal
Disconnect Versa-Tether, if necessary.
While pushing restraint firmly into
vehicle seat, release lock-off and
vehicle belt.
7�
•
8�
9�
Installation: Forward Facing
D
E