Banner U-GAGE T30U—Level Control - Manual (Page 10)

U-GAGE ™ T30 Series with Analog and Discrete Outputs
10 P/N 57438 Rev. C
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SMB30C SMB30SC
56.0 mm
(2.20")
63.0 mm
(2.48")
45.0 mm
(1.77")
2.5 mm
(0.10")
31.5 mm
(1.24")
Nut Plate
M5 x 0.8
x 80 mm
Screw (2)
13 mm
(0.5")
13.5 mm
(0.53")
50.8 mm
(2.00")
58.7 mm
(2.31")
66.5 mm
(2.62")
30.0 mm
(1.18")
30 x 1.5 mm
internal thread
29.0 mm
(1.14")
12.7 mm
(0.50")
• 30 mm split clamp with swivel, black reinforced
thermoplastic polyester
• Stainless steel hardware included
• 30 mm split clamp, black reinforced thermoplastic
polyester
• Stainless steel hardware included
Mounting Brackets