E-flite Mini Pulse XT PNP - Manual (Page 2)

 E-flite Mini Pulse PNP Assembly Manual
Introduction
Thank you for purchasing the Mini Pulse XT PNP ® . Designed
from the beginning for electric power, the Mini Pulse XT PNP is
developed from the Hangar 9 ® Pulse ™ XT with the same flight
characteristics as the 40-size version. It is a perfect transitional
airplane for beginners who want to learn aerobatics and for
sport flyers who want an easy, comfortable sport flyer. All flight
control surfaces, hinges, and control horns have been installed
at the factory to help speed up the building time.
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next
to each step to keep track of each step completed. Steps with
a single circle () are performed once, while steps with two
circles ( ) indicate that the step will require repeating, such
as for a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.
Required Tools and Adhesives
Tools & Equipment
EFLA250 Park Flyer Tool Assortment, 5-piece
Or Purchase Separately
EFLA257 Screwdriver, #0 Phillips (or included with EFLA250)
EFLA255 Nut Driver, 5.5mm (or included with EFLA250)
EFLA251 Hex Wrench: 3/32" (or included with EFLA250)
Table of Contents
Specifications .........................................................................1
Introduction ............................................................................2
Using the Manual ...................................................................2
Required Tools and Adhesives .................................................2
Contents of Kit/Parts Layout ....................................................3
Required Radio Equipment ......................................................3
Battery and Charger ...............................................................3
Optional Accessories ..............................................................4
Required Tools and Adhesives .................................................4
Note Regarding Hinges ..........................................................4
Note on Lithium Polymer Batteries ...........................................4
Warning ................................................................................4
Warranty Period ....................................................................4
Limited Warranty ...................................................................5
Damage Limits .......................................................................5
Safety Precautions ..................................................................6
Questions, Assistance, and Repairs .........................................6
Inspection or Repairs ..............................................................6
Warranty Inspection and Repairs ............................................6
Non-Warranty Repairs ...........................................................7
Safety, Precautions, and Warnings ..........................................8
Landing Gear Installation ........................................................8
Propeller Installation .............................................................10
Tail Installation .....................................................................12
Final Assembly .....................................................................14
Control Throws .....................................................................16
Range Testing the Radio ........................................................16
Center of Gravity .................................................................17
Preflight ...............................................................................17
2007 Official AMA National Model Aircraft Safety Code ......18
Building and Flying Notes .....................................................19