E-flite Mini Pulse XT PNP - Manual (Page 3)

 E-flite Mini Pulse PNP Assembly Manual
Contents of Kit/Parts Layout
Large Replacement Parts:
EFL2376 Wing w/Ailerons
EFL2377 Fuselage
EFL2378 Tail Set
EFL2380 Main Landing Gear
EFL2381 Cowling
EFL2382 Wheel Pants
Small Replacement Parts:
EFL2379 Pushrod Set
EFL2383 Motor X-Mount
EFLA200 Micro Control Horns
EFLA203 Micro Control Connectors
EFLA219 Steerable Tailwheel Assembly
EFLA223 Foam Park Wheels, 2"
EFLA213 E-flite/JR/Horizon Decals
Required Radio Equipment
The Mini Pulse PNP requires a 4-channel transmitter and
micro receiver. Users of Spektrum’s DX6 2.4GHz park flyer
system will need an AR6000 6-channel park flyer receiver
(SPM6000). Users of standard FM systems should try JR SPORT’s
6-channnel UltraLite receiver (JSP30610-positive
shift, JSP30615-negative shift).
Complete Radio System
SPM2460 DX6 DSM 6CH Park Flyer w/4-S75
Servos
Note: We recommend the crystal-free, interference-free
Spektrum ® DX6 2.4GHz DSM ® 6-Channel System.
Note: If you purchase a new complete radio system, you
will not use the servos since four servos are installed.
Or Purchase Separately
SPM6000 AR6000 DSM DualLink ™ 6-Channel
Park Flyer Rx
Or
JSP30610 6-Channel UltraLite Rx w/o Crystal,
Positive Shift JR/AIR (72MHz)
Or
JSP30615 6-Channel UltraLite Rx w/o Crystal,
Negative Shift FUT/HRC (72MHz)
JRPXFR** FM Receiver Crystal
Battery and Charger
THP21003SPL 2100mAh 3-Cell 11.1V Li-Po, 16GA
Or
EFLB1035 11.1V 2100mAh 3-Cell Li-Po, 16GA
EFLC3005 Celectra™ 1–3 Cell Li-Po Charger