Tension adjustment knobs, A. optional upper rear rewind tension, B. upper unwind tension – GBC 64Ct User Manual
Page 23: C. upper front rewind tension, D. pull roller clutch tension (44t, 64t), E. optional lower front unwind tension, F. optional lower rear rewind tension, G. front lower unwind tension
Page 5-9
SPIRE III Series – Installation and Operating Instructions
t
ensIon
a
dJustment
k
noBs
Turn the knobs clockwise to increase tension and
counterclockwise to reduce tension.
Figure 26. Tension Knobs on end of the laminator.
a. o
ptIonal
u
pper
r
ear
r
eWInd
t
ensIon
Use the optional Upper Rear Rewind Tension knob to
adjust the amount of pull on the finished media.
B. u
pper
u
nWInd
t
ensIon
Use the Upper Unwind Tension to adjust the amount
of film web tension as needed to reduce curl and
wrinkles.
c. u
pper
F
ront
r
eWInd
t
ensIon
Use the Upper Front Rewind Tension knob to adjust
the amount of pull on the release liner. This prevents
the release liner from being pulled into the laminator
or the film from wrapping around the rewind tube.
d. p
ull
r
oller
c
lutcH
t
ensIon
(44t, 64t)
Use the Pull Roller Clutch Tension knob to adjust the
amount of film web tension as needed to reduce curl
and wrinkles.
e. o
ptIonal
l
oWer
F
ront
u
nWInd
t
ensIon
Use the optional Lower Front Unwind Tension to
adjust the amount of brake that is being applied to
the film or media.
F. o
ptIonal
l
oWer
r
ear
r
eWInd
t
ensIon
Use the Optional Lower Rear Rewind Tension knob
to adjust the amount of pull on the release liner.
G. F
ront
l
oWer
u
nWInd
t
ensIon
Use the Front Lower Unwind Tension it adjust the
amount of film web tension as needed to reduce curl
and wrinkles.
Note: AlWAyS RElEASE All TENSION BRAkES,
BOTH UPPER UNWIND AND REWIND, BEFORE
lOADING THE FIlM. ONCE lOADED, START By
ADDING TENSION TO THE REWIND FIRST.