Worn parts feed and cut area – GBC Stl1000 User Manual
Page 40
Advertising
39
direction after all of the water has drained. NOTE: a ¼ inch soft nylon tube can be attached to the end
of the drain so that the water can be emptied into a container.
The regulator portion (see figure 17-1) of the FRL is used to regulate the air pressure being supplied to
the machine. The proper setting is 80 PSI. To adjust the pressure, pull the regulator knob down and
turn clockwise to reduce the pressure and turn counter-clockwise to increase the pressure. Push the
knob back up to lock it into position.
WORN PARTS
FEED AND CUT AREA
Advertising