HCO SG550 - Manual (Page 13)

HCO 3-Advanced Setting SG550/SG530
Page 10
(d) (4)
Figure 6: Formatting SD card
3.1.3 Image Resolution
This parameter has two optional values: 5 mega pixels (5M Pixel or 5MP) and 3 mega pixels
(3M Pixel or 3MP). The default value is 3 mega pixels.
1 In MENU, Press the UP or DOWN key until the parameter “Image Size” appears, as
shown in Fig. 7(a) and 7(1).
2 Press the RIGHT key, the value of the parameter will be changed between “5M Pixel”
and “3M Pixel”, as shown in Fig. 7(b) and 7(2). The value will be highlighted.
3 Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 7(c) and 7(3).
(a) (1)
(b) (2)
(c) (3)
Figure 7: Setting image resolution
3.1.4 Video Resolution
This parameter has two values: VGA (640x480) and QVGA (320x240). The default value is
640x480 (VGA). The following demonstrates how to switch the video size, i.e. video
resolution, from 640x480 to 320x240:
1 In MENU, Press the UP or DOWN key until the parameter “Video Size” appears, as
shown in Fig. 8(a) and 8(1).