HCO SG550 - Manual (Page 16)

HCO 3-Advanced Setting SG550/SG530
Page 13
(g) (7)
(h) (8)
(i) (9)
(j) (10)
(k) (11)
(l) (12)
Figure 9: Setting date and time
3.1.6 Shooting Mode (1, 2, 3 Photos)
You can let the camera take 1, 2 or 3 Photos after each trigger by setting the shooting mode.
This setting is effective only in the “camera” mode (refer to 3.1.1) when the camera is in the
LIVE mode. The default value is 1 Photo after each trigger.
1 In MENU, press the UP or DOWN key until “Capture Number” appears, as shown in
Fig. 10(a) and 10(1).
2 Press the RIGHT key to change the value to the desired number (1, 2 and 3). The
desired number will be highlighted, as shown in Fig. 10(b) and 10(2).