HCO SG550 User Manual
Page 17
HCO
3-Advanced Setting SG550/SG530
Page 14
3
Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 10(c) and
10(3).
（a）
(1)
（b）
(2)
（c）
(3)
Figure 10: Setting shooting numbers
3.1.7 Video Length
This parameter sets the video length that the camera will take after each trigger. This setting is
only effective in the “video” mode when camera is in the LIVE mode. The default value of
video length is 10 seconds after each trigger. It can be adjusted from 1 to 60 seconds in the
increment of one second. Press the RIGHT key to change the value by one second or press the
RIGHT key and hold for a few seconds, the value will be increased by 5 seconds or 10 seconds.
1
Enter into the Test mode, press the MENU key, press the UP or DOWN key until
“Video Length” appears, as shown in Fig. 11(a) and 11(1).
2
Press the RIGHT key until the desired value appears, as shown in Fig. 11(b) and 11(2).
3
Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 11(c) and
11(3).
（a）
(1)