HCO SG550 - Manual (Page 14)

HCO 3-Advanced Setting SG550/SG530
Page 11
2 Press the RIGHT key, the value of this parameter will be changed between “640x480”
and “320x240”, as shown in Fig. 8(b) and 8(2).
3 Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 8(c) and 8(3).
(a) (1)
(b) (2)
(c) (3)
Figure 8: Setting video size
3.1.5 Date and Time
You can change the date and time of the device by setting this parameter when necessary, e.g.,
after every battery change. In this setting procedure, the function of some keys is not the same
as the function in other settings: the UP/DOWN keys are used to change the value of date/time
and the RIGHT key is used to jump to the next menu. The format of the date is
Month/Day/Year. The format of time is Hour : Minute : Second. The valid value for year is
between 2006 and 2031.
1 Press the UP or DOWN key until “Set Clock” appears, as shown in Fig. 9(a) and 9(1).
2 Press the OK key to start setting the month. The current date and time will be displayed
and the month will be highlighted, as shown in Fig. 9(b) and 9(2).
3 Press the UP or DOWN key to change the month to the desired value. And then press
the RIGHT key to set the day. The day will be highlighted, as shown in Fig. 9(c) and
9(3).
4 Press the UP or DOWN key until the desired day, as shown in Fig. 9(d) and 9(4).
5 Press the RIGHT key to set the year. The year will be highlighted, as shown in Fig. 9(e)
and 9(5).
6 Press the UP or DOWN key to set the year to the desired year, as shown in Fig. 9(f) and
9(6).
7 Press the RIGHT key to set the hour. The hour will be highlighted, as shown in Fig. 9(g)