HCO SG550 - Manual (Page 22)

HCO 3-Advanced Setting SG550/SG530
Page 19
(f) (6)
(g) (7)
(h) (8)
(i) (9)
(j) (10)
(k) (11)
Figure 15: Setting timer
3.1.12 Restoring Default Settings
The camera can be restored to factory default setting by the following steps:
1 In MENU, press the UP or DOWN key until Default Set appears, as shown in Fig. 16(a)
and 16(1).
2 Press the OK key to restore default settings or press the MENU key to cancel and exit.
After pressing the OK key, the camera will be back to factory default settings (see Table
1). Fig. 16(b) shows the information after you press the OK key.
(a) (1)