HCO SG580M Manual - Manual (Page 13)

HCO ScoutGuard SG580M
4 Advanced Operations
Page 10
empty.
Password
For the security sake, enter a password each time when entering
Test mode. The default password is 0000. You could choose OFF
to stop this function.
Default Set Restore all customer settings to default values.
4.1.1 Default Setting
Defaults settings are listed below:
Setting Items Default Options Submenu
Camera Mode Photo Video
Format Enter Yes, No
Photo Size 3M Pixel 5M Pixel
Video Size 640 Ч 480 320 Ч 240
Set Clock Enter Adjust Clock
Photo Burst 1 Photo 2 Photo, 3 Photo
Video Length Avi 10 sec Avi 5–60 sec
Video Sound On Off
Interval 1 Min 5–60 seconds, 1-60 min
Sense Level Normal High, Low
Timer Off On
Start, Stop (00:00 –
23:59)
Flash Range 20ft./6m 40ft./12m
MMS Set Enter
URL, APN, IP,
Port
MMS Mode Off
Manual, Daily Report,
Instant
Send To Number Email, Both 4 inputs
Password OFF ON
Default Set
4.1.2 General Settings
The operating steps are suitable for following menu items: Camera Mode, Photo
Size, Video Size, Photo Burst, Video Length, Interval, Sense Level, Timer and
MMS Mode.
4.1.3 Set Camera Mode
There are two ways to set the camera mode: 1. Via shortcut key; 2. Via setting
menu.
1. Shortcut key: Press UP to set the camera mode as Video or press DOWN to set
camera mode as Photo in info display of TEST mode.
2. Setting menu: The following shows how to set camera mode to Video, provided
that the previous option is Photo:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Camera Mode.