HCO SG580M Manual - Manual (Page 14)

HCO ScoutGuard SG580M
4 Advanced Operations
Page 11
c) Press LEFT or RIGHT to select Video.
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.4 Format SD-Card
The system will delete all images or videos stored in the SD-card after formatting,
make sure that you have made a backup of important data.
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Format.
c) Press OK to choose Enter to enter into submenu.
d) Press LEFT or RIGHT to select Yes. Yes will be highlighted.
e) Press OK to start formatting the SD-card. During formatting, the display
screen will show a message “Please Wait” as below.
Press MENU to cancel setting and return to info display.
4.1.5 Set Photo Size
The following shows how to set pixel size as 3M Pixel provided that the previous
option is 5M Pixel:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Photo Size.
c) Press LEFT or RIGHT to select 3M Pixel.
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.6 Set Video Size
The following shows how to set video size as 320×240 provided that the previous
option is at 640×480:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Video Size.
c) Press LEFT or RIGHT to select 320×240.
d) Press OK to save the current setting and the option will be un-highlighted.
Press MENU to cancel setting and return to info display.
4.1.7 Set Date and Time
The date format is month/day/year, the time format is hour: minute: second.
The valid value for year is between 2006 and 2031. Provided that the date and time
are needed to be set to November 15th, 2007 and half past ten, the steps are as
following:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Set Clock.
c) Press OK to enter into submenu.
d) Press LEFT or RIGHT to select item, press UP or DOWN to change the value.
Please Wait!