HCO SG580M Manual - Manual (Page 8)

HCO ScoutGuard SG580M
2 Cautions
Page 5
2 Cautions
★ The working voltage of the camera is 6V. The camera is supplied by four or eight
AA batteries.
★ Please install batteries according to shown polarity.
★ Please unlock the write-protect before inserting the SD-card.
★ Please insert the SD-card when the power switch is at OFF position before testing
the camera. The camera has no internal memory for saving images or videos. If no
SD-card is inserted, the camera will shut down automatically after a continuous
indication sound.
★ Please do not insert or take out the SD-card when the power switch is at ON
position.
★ It is recommended to format the SD-card by the camera when used at the first
time.
★ The camera will be in USB mode when connected to a USB port of a computer. In
this case, the SD-card functions as a removable disk.
★ In the TEST mode, the camera will shut down automatically after 3 minutes if no
operation is done. Please turn on the power again if you want to continue to work
with the control.
★ Please ensure sufficient power when having firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly. If any fault occurs after improper
upgrading process, the camera may stop function properly.
★ As communication networks reasons we can’t guarantee 100% success by sending
and receiving MMS.
!