2 playback – HCO SG580M Manual User Manual

Page 18

Advertising
background image

HCO ScoutGuard SG580M

4 Advanced Operations

Page 15

d) Press OK to enter into submenu.
e) There are three inputs for key in new, old and confirm password, press

to

switch between each inputs. Press number buttons to key in the digits. Press
UP to delete.

f) Enter OK to save all current setting and return to info display. If the inputs are

blank, the password will not be changed; if key in correctly, the new password
is set. The LCD screen will prompt to enter password next time you switch on
the camera.
Press MENU to cancel setting and return to previous menu.

4.1.19 Reset to Default Settings

To reset the setting to the default values, the steps are as followings:
a) Press MENU to display the setting menu.
b) Press UP or DOWN to select Reset.
c) Press OK to reset to default settings and return to info display.

Press MENU to cancel setting and return to info display.

4.2 Playback

In playback mode, images or videos can be viewed, deleted and image can be

manually sent by MMS. It can only be done in TEST mode.

The images can be viewed on: LCD screen on camera and TV monitor which

connect to camera with TV cable; the videos can only be viewed on TV monitor. For
simplicity, operations with PC won’t be introduced here.

4.2.1 Viewing Photo or Video

a) Switch to TEST mode and enter into info display.
b) Press OK to view the latest picture

(or video) in LCD screen on camera, TV

monitor or Image viewer with TV-in connector.

c) Press RIGHT to start playing the video clip in TV monitor, video clip cannot

be played in LCD screen on camera.

d) Press RIGHT to stop playing and return to playback mode.
e) Press UP to view the next picture (or video) and DOWN for the previous.
f) Press OK to return to info display.
When view images, the total number of all images in the SD-card and the index

of the displaying image will be shown respectively.

4.2.2 Delete Photo or Video

a) View the image (or video) which to be deleted (please refer to 4.3.1).
b) Press MENU to display the playback menu.
c) Press UP or DOWN to select Delete. One is highlighted.
d) To delete the current image, just skip this step. To delete all images and

videos, press LEFT or RIGHT to select All.

e) Press OK, No and Yes are prompted. No is highlighted.
f) Press LEFT or RIGHT to highlight Yes.
g) Press OK to delete the image or video.

Press MENU to cancel and return to playback.

Advertising