F4 f2 f3 – HF scientific Micro200BW Turbidimeter - 0-100 NTU User Manual
Page 25
MICRO 200 BW 0-10 & 0-100 NTU (05/05)
Rev. 3.4
Page 13
3.2.1 Turbidity Display
This is the turbidity display. The display shown above is fairly typical. The display has the following parameters:
1 -
CURRENT TURBIDITY READING: 0.4775 NTU
2 -
GRAPH TIME BASE: 24 HOURS
3 -
GRAPH UPPER LIMIT: 0.60 NTU
4 -
GRAPH LOWER LIMIT: 0.40 NTU
5 -
ALARM 1 SETTING: ALARM ON HIGHER THAN 0.55 NTU
6 -
ALARM 2 SETTING: ALARM ON LOWER THAN 0.10 NTU
7 -
TIME: 10:00 AM (SHOWN IN 24 HOUR CLOCK MODE)
8 -
DATE: MAR 04
9 -
GRAPH OF TURBIDITY HISTORY
2
4
F1
1
6
7
9
5
3
8
Menu
F4
F2
F3
................................................
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
.......................
.................
............
Menu
To leave the turbidity display and get to the Main Menu push . F1 - F4 are nonfunctional in this display.
Please note that the graph history shows the average reading taken within the sample period.