HF scientific Micro200BW Turbidimeter - 0-100 NTU - Manual (Page 35)

MICRO 200 BW 0-10 & 0-100 NTU (05/05)
Rev. 3.4
By pressing in the Communications menu.
In this menu you can select two time periods that a report can be sent to the printer. You
can choose a report every four hours or every 24 hours. If the printer option above is turned
On and either report time is selected, the report will be printed at the interval selected. If
both printer and report are Off then no output data will be available. You can change the
report selection by using the
keys.
By pressing in the Communications menu.
In this menu an address may be assigned to a particular instrument. You may select the
address from
∅ to F, Hexadecimal by using the
keys.
F4
3.2.6 Monitor Setup - Continued
Page 23
F3
COMMUNICATIONS
10NTU TURBIDITY
BAUD
96 ∅∅
PRINTER
ON
ADDRESS
1
REPORT
4HR
VER:200NTUBW-8A23E
COMMUNICATIONS
10NTU TURBIDITY
BAUD
96 ∅∅
PRINTER
ON
ADDRESS
1
REPORT
4HR
VER:200NTUBW-8A23E