Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 29)

STEPPER MOTORS DEMYSTIFIED
MOTION CONTROL - ADVANCED
CONTINUED
You are not just limited to linear moves like this. Another real-world
example would be setting up a turn table on an elektraDRIVE motor
where you just want the motor to turn on and stay on for a certain
period of time.
If you wanted your turn table to spin for 10 minutes, you
could define a motor ON time of 10 minutes at POWER 40
and 1 CYCLE. This would spin the table for 10 minutes and
then stop (1 cycle).
This may sound complicated all written out but once you get some
practical experience with the ORACLE, this will be easier to make sense
of. Adjusting the 4 variables in advanced mode of the ORACLE will
allow you to create just about any move you can imagine for an endless
number of configurations.
29