Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 6)

For more information on recording and playing back camera moves,
reference that section in this quick start guide or in the ORACLE manual.
G. MAX SPEED control dial
This dial is used to control the maximum speed of the elektraDRIVE
motors. The value is adjustable from 28 (being the slowest) to 1000
(being the fastest) and is displayed in the left column of the top
row on the home screen. For the sliders, these values are arbi-
trary and will vary depending on the which series of motor you are
using. Adjust and test as needed to achieve the speed required.
This dial can be adjusted in real-time during a camera move to ramp
speed up and down. These values are also recorded if creating a
recording to one of the memory banks.
H. DAMPING control dial
This dial is used to control the damping of the elektraDRIVE motors. The
value is adjustable in seconds from .055s to 2.55s and is
displayed in the center column of the top row on the home screen.
Damping is the amount of time the motor takes to achieve maximum
speed ( G. ). This helps smooth the motion of moves.
A low value will make the motor jump to full speed quickly creating
snappy moves.
ORACLE OVERVIEW
CONTINUED
This section will cover the basic functions of the ORACLE and what
each button and dial controls in the system.
A Backlit LCD Screen
B MENU Button
C ENTER Button
D Memory Bank 1
E Memory Bank 2
F Memory Bank 3
G MAX SPEED Control Dial
H DAMPENING Control Dial
I Deadband Control Dial
J Joystick Button
K Joystick
6