Kessler MOTION CONTROL: Oracle Controller Full (3.02 SL) - Manual (Page 36)

UTILITY - HEAD/SLIDER/TT TOGGLING
There are 2 ways to toggle which mode you want (Head/Slider/TT).
If power is OFF:
1. Connect the ORACLE to the elektraDRIVE motor with a
standard CAT5 cable.
2. Connect the power to the ORACLE
3. Move the joystick down once to select Head Unit or
Slider/TT
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm.
If power is already ON:
1. Press the MENU button until you see Camera and
Motion Control
2. Move the Joystick down to select Utility .
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm.
Head Unit <
Slider/TT
Joystick ^
Utility <
Camera
Motion Control v
3. Select Head/Slider/TT
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm.
4. Select Head Unit or Slider/TT depending on what
unit you are using
Press the MIDDLE JOYSTICK BUTTON or ENTER to confirm.
Head/Slider/TT <
Battery v
Head Unit
Slider/TT
36