Revel B15a - Manual (Page 10)

Figure 5. The Revel Performa
B15a subwoofer adjustable spike
footing.
To adjust the spike footing:
1. Place the B15a on its side on a soft towel or carpeted floor.
2. Remove the protective cap from the round end of the spike.
Save it for possible future use.
3. Rotate the locking ring counterclockwise to detach it from the
spike. Save it for use in step 6.
4. Rotate the spike counterclockwise to remove it from the
cabinet.
5. Rotate the spike clockwise into the cabinet, round end first,
as shown on the right side of Figure 5 (above).
6. Reattach the locking ring, rotating it clockwise to firmly
secure the spike to the cabinet.
7. Repeat steps 2 through 6 for the remaining three spikes.
8. When all four spikes have been reversed, stand the B15a in the
upright position. If needed, repeat steps 1 and 6 to achieve a
level balance.
REVEL PERFORMA B15a
Owner’s Manual
10
Locking Ring
Round End
(Protective Cap
Attached)
Locking Ring
Round End
Spike End
Protective Cap
Spike End
Spike End
Round End
(Protective Cap Removed)
When shipped, the spikes
are attached as shown here
for loudspeaker placement on
tile or hardwood floors. The spikes should be
attached as shown here
for loudspeaker placement on
carpeted floors.
B15a