Revel B15a - Manual (Page 16)

Figure 11. How to connect the
Revel Performa B15a subwoofer
to a home theater multi-channel
controller using the controller’s
crossover.
CONNECTIONS (Continued)
REVEL PERFORMA B15a SUBWOOFER AND A
MULTI-CHANNEL CONTROLLER USING THE
CONTROLLER’S CROSSOVER
In this application, the B15a subwoofer’s internal low-pass filter is
bypassed and the multi-channel controller’s crossover is used
instead, as shown in Figure 11.
REVEL PERFORMA B15a
Owner’s Manual
16
B15a Rear Panel (split view)
*To SUB/LFE Output
(if using optional Y-adapter)
*To SUB/LFE Output
(if using optional Y-adapter)
Use L or R Input and
Increase Low Pass Level;
*Or Use Optional
Y-adapter, If Desired. NOTE: Use AUX OUTPUT to
connect to INPUT on another B15.
Also see Figure 12 on page 19.
Multi-Channel Controller (Decoder)
(rear)
Left Output
FRONT/MAIN
Right Output
Left Output
REAR
Right Output
Left Output
SURROUND/SIDE
Right Output
CENTER Output
SUB/LFE Output
NOTE: Set Controller to
SUB “On” and set the
cross-over in the controller
to 80Hz.
Main Amplifier
(rear)
To Main Speakers
Left Input
Left Right
Right Input
or or
or
or or