Revel B15a - Manual (Page 26)

AMPLIFIER
Output Power: 1,000 Wrms , 1,400 Wpeak
Equalization –
Type: Three independent parametric equalizers
Frequency: Continuously variable from 18 to 80 Hz
Bandwidth: Continuously variable from 0.1 to 1 Octave
Level: Continuously variable from -14.5 to +6 dB
Low-Pass Filter –
Type: Low pass with ON/OFF switch
Slope: Selectable 24 or 48 dB per octave
Frequency: Selectable at 30, 40, 50, 60, 70, or 80 Hz
Phase: Continuously variable from 0 to 180°
Level: Continuously variable
High-Pass Filter –
Type: High pass, always on
Slope: Selectable 12 or 24 dB per octave
OBTAINING SERVICE
Before returning a product for warranty or non-warranty service,
contact Harman Specialty Group Customer Support to determine
the extent of the problem and to obtain a Return Material
Authorization (RMA) number. No products will be accepted with-
out an RMA number issued from Harman Specialty Group.
If a Revel product must be returned for repair, Harman Specialty
Group will assume no responsibility for the product during ship-
ment from the customer to Harman Specialty Group, whether the
product is or is not covered under warranty.
All returns must be:
• well-packaged using the original packing materials (if possible)
• properly insured and consigned
• pre-paid to a reliable shipping agent
Continued on the next page...
REVEL PERFORMA B15a
Owner’s Manual
26