Rear panel layout (continued), Connections – Revel B15a User Manual

Page 14

Advertising
background image

REAR PANEL LAYOUT
(Continued)

6

Fused power connector for (enclosed) detachable IEC power
cord. If needed, replace the fuse with same type, as follows:
• For 120V units, use a 10A fast-blow fuse.
• For 220V units, use a 5A fast-blow fuse.

7

POWER Switch: Press OFF to completely turn off power to
the B15a subwoofer. Press AUTO ON to set the subwoofer to
enter and exit standby mode automatically. Internal sense
circuits will continually detect the presence of audio signals and
will turn on the subwoofer when needed. After some time,
when audio is no longer present, the same circuits will instruct
the subwoofer to enter the standby mode to conserve energy.

CONNECTIONS

Audio interconnection to your main amplifier or home theater
controller can be any combination of unbalanced or balanced
terminations, with full balanced connections offering the best
noise rejection.

Please read the following six applications (starting on the next page)
before proceeding with the actual connections. For clarity, power
connections are not shown. Also, be sure to observe the following:

Turn off all audio system power before making any connections.

Read the owner’s manuals that were included with your audio
components to confirm their connection procedures.

REVEL PERFORMA B15a

Owner’s Manual

14

Advertising