Revel B15a - Manual (Page 8)

Figure 3.The Revel
Performa B15a subwoofer pack-
ing carton.
UNPACKING
The B15a requires special care and handling during unpacking.
Pay particular attention to the precautions that appear in this
section and to other precautions that appear throughout this
owner’s manual.
Do not attempt to lift or move the B15a alone. Proper lifting
requires at least two strong people. When lifting the B15a, stand
as straight as possible using the leg muscles to lift. Do not
attempt to lift the B15a while bending at the waist. When
moving the B15a, carefully rock it side-to-side into the desired
position. Failure to follow these procedures may result in person-
al injuries and/or loudspeaker damage.
When unpacking, save all packing materials identified in Figure 4
at the bottom of the next page for possible future shipping needs.
Refer to the Obtaining Service section on page 26 for additional
information.
1. Set the packaged Revel Performa B15a subwoofer on a soft
towel or carpeted surface in the upright position. Open the top
flaps as shown in Step 1 of Figure 3 (below). Set aside the
power cord and other items located on the top pad.
2. With the top flaps folded back, roll the carton over onto its
exposed top pad as shown in Step 2 of Figure 3 (below).
3. Lift the packing carton off the subwoofer as shown in Step 3
of Figure 3 (below). Use caution to avoid damaging the
contents.
REVEL PERFORMA B15a
Owner’s Manual
8
WARNING
TOP
BOTTOM
BOTTOM
TOP
2
3
1