SONIQ CWR300ND - Manual (Page 31)

- 29 -
Note:
If the WAN connection type is set to 1483 Routed, the parameters of the WAN
connection type are the same as those of 1483 MER: Static IP. For the
parameters in these pages, refer to the parameter description of 1483 MER:
Static IP.
Click BACK to modify the settings.
Click FINISH to save the settings.
Click RESET to cancel the settings.
3.3 Status
In the navigation bar, choose Status. In the Status page that is displayed contains:
System, LAN, WLAN, WAN, Port Mapping, Statistics and ARP Table.
3.3.1 System
Choose Status > System. The page that is displayed shows the current status and
some basic settings of the router, such as software version, DSP version, uptime,
upstream speed and downstream speed.