SONIQ CWR300ND - Manual (Page 97)

- 95 -
The following table describes the parameters of this page:
Field Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need
to enable NTP if you want to configure the
parameters of NTP.
Primary Server Set the primary NTP server manually.
Secondary Server Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from
the drop down list.
3.7.6 Logout
Choose Admin > Logout, the page shown in the following figure appears. You can
click the link to log out and you will be redirected to the login page.
3.8 Diagnostic
In the navigation bar, click Diagnostic. The Diagnostic page that is displayed
contains Ping, ATM Loopback, ADSL and Diagnostic Test.
3.8.1 Ping
Choose Diagnostic > Ping. The page shown in the following figure appears.