SONIQ CWR300ND - Manual (Page 92)

- 90 -
The following table describes the parameters and button of this page:
Field Description
Reboot from
You can choose Save the current
configuration or Restore to the factory
default configuration.

Save the current configuration: Save
the current settings, and then reboot the router.

Restore to the factory default
configuration: Reset to the factory default
settings, and then reboot the the router.
Reboot Click it to reboot the router.
3.7.2 Upgrade
Choose Admin > Upgrade. The Upgrade page that is displayed contains
Upgrade Firmware and Backup/Restore.
Caution:
Do not turn off the router or press the Reset button while the procedure is
in progress.
3.7.2.1 Upgrade Firmware
Click Upgrade Firmware in the left pane, the page shown in the following figure
appears. In this page, you can upgrade the firmware of the router.