SONIQ CWR300ND User Manual
Page 58
- 56 -
The following describes the parameters of this page:
Field
Description
Enable
VAP0/1/2/3
Tick to enable VAP0 /1/2/3, or untick the check box
to disable it.
SSID
Set a wireless SSID of VAP0 /1/2/3.
Broadcast SSID
Choose to enable or disable VAP0 /1/2/3 SSID
broadcast.
Relay Blocking
Choose to enable or disable access blocking
between two wireless points.
Authentication
Type
Set the authentication type of VAP0 /1/2/3.
3.4.3.5 Advanced Setting
Choose Wireless > Advanced Setting and the following page appears. In this
page, you can configure the wireless advanced parameters. It is recommended to
use the default parameters.
Note:
The parameters in the Advanced Settings are modified by the professional
personnel, it is recommended to keep the default values.