Stealth Cam STC-I840IR Rogue-IR - Manual (Page 19)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
19
Press the Up button to modify the previous setting or the Down button
to program the TV out setting.
NOTE: If you press Menu before pressing the OK button, you will exit
the programming mode without saving your quality setting.
TV (NTSC or PAL)
The NTSC icon will be flashing. The factory default setting is NTSC for
North America usage.
If you don’t need any changes, press Down
button and skip to Date/Time setting.
Or Press Right button once to choose PAL setting.
Press O.K. to confirm setting, the icon will stop flashing. Press Menu to
exit or press the Up button to modify previous setting or the Down
button to enter Date/Time setting.
Date / Time Setting
(The camera uses the 24 hour military time format only.)
The Date/Time icon will flash.
Press OK to enter the setting mode.
Set date and time.